MIXING INSTRUCTIONS FOR VB-SHOTZ

250ML VB-SHOT:

The amounts listed below will leave your 250ml VB-SHOT a 70/30 VG PG outcome. The shown amounts will give you 4 nicotine strength options to choose from. 3mg, 6mg, 9mg and 12mg. Or if you don't use nicotine, please follow the calculations in the 2nd chart. Please ensure your calculations are accurate before mixing. The amounts shown are calculated with VapeBunkerUK’s (2.0mg/ml) nicotine shots. All our 250ml bottles come with 50ml or 20% concentrate (PG based). Some flavoured concentrates may contain traces of nut.

 

Please allow at least 2 - 3 full weeks for all VB-SHOTZ to properly steep. Some flavours may take longer to steep than others, but its highly recommended you wait a minimum of 2 - 3 weeks to ensure maximum flavour. Obviously the longer you leave it, the better the flavour will get over time. Always remember to shake very well before every use. Store it in a cool (room temperature) dark place to steep.

 

3mg

6mg

9mg

12mg

Nicotine 2.0mg

37.5ml

75ml

112.5ml

150ml

PG

25ml

25ml

25ml

25ml

VG

137.5ml

100ml

62.5

25ml

Concentrate (supplied)

50ml

50ml

50ml

50ml

Outcome Profile

70/30 VG PG

70/30 VG PG

70/30 VG PG

70/30 VG PG

Outcome bottle size

250ml

250ml

250ml

250ml

 

 

Calculations for a Nicotine Free VB-SHOT at 70/30 VG PG outcome.

PG

25ml

10%

VG

175ml

70%

Concentrate (supplied)

50ml

20%

Total bottle size

250ml

100%

 

 

All the contents supplied by VapeBunkerUK for these VB-SHOTZ is the same contents that’s used to make up our own E-liquids. Everything is Pharmaceutical grade and is very easy on stock coils, handmade coils and cotton. You may be able to purchase these products elsewhere, but we cannot guarantee the same quality outcome.

 

If you wanted to mix this shot to have a different base profile outcome, like 60/40 or 80/20 VG PG for example, ensure that you do all your calculations currently before mixing. Online mixing calculators can be easily found on google. We have a link to one on our site, click ‘here’ to view it. If that’s the route you want to take, try and find one that you completely understand, and double check the numbers before adding anything to your DIY shot.

 

VapeBunkerUK uses a 70/30 VG PG base profile for all our e-liquids, and now recommends the same for our new DIY shots. As it’s the most evenly balanced number between cloud and flavour. We recommend using the 2.0mg nicotine shots for these DIY bottles, and the 1.8mg nicotine shots are used for our short-fill e-liquid range. Just in case you’d get mixed up, or don’t understand why we supply both.

 

 

If you require help with these DIY shots or have any questions about the calculations and measurements listed in our guide, please contact us for further assistance.